SawMaster Diamond Tools, Inc. - Diamond Tools for the Industry Professional
Search Go
  Home     Catalog     Support  
 
Saw
Home >  Product Catalog >  Saws >  Stone Saws > 

SDT-1037
Stone Saw
 

SDT-1037 For small to midsize stone projects, SawMaster offers the SDT-1037 bridge saw. While it shares the same 1-1/2 HP motor and 10" blade of the entry-level SDT-1027, the SDT-1037 provides a substantially larger cutting capacity, with cutting lengths of up to 37" straight and 24" diagonal. Due to the saw's larger dimensions, the SDT-1037 includes a set of wheel-enhanced slide-in-legs to assist in its transportation and deployment at the job site.


Product Views
Enlarged Angle View






Product Specifications
Saw Type     Stone
Motor     115 V/60 Hz
Horsepower     1-1/2 HP
Blade Capacity     8"~10"
Blade Arbor     5/8"
RPM     3450
Weight     166 lbs
Cutting Depth     2-5/8"
Rip Cutting     37"
Diagonal Cutting     26" x 26"
Thermal Protection     Equipped
Features Click on Feature Photo Available to see a close-up of the Feature

Feature Reinforced Rail
The carriage slides along a reinforced rail using ball bearing wheels to promote smooth movmenet for increased cutting accuracy in either normal or miter cutting configurations.

Feature MasterGuide
For greater versatility, a complete MasterGuide cutting accessory is included with the saw to facilitate cuts of all specifications.

Feature Rubber Matted Cutting Table
The main cutting table and extension table are covered with a rubber mat that steadies the material being cut for greater accuracy.

Feature Steel Water Tray
The highly durable steel tray located beneath the table collects water and debris expelled during saw operation.

Feature Miter Cutting CapabilityFeature Photo Available
The rail along with the cutting head can be tilted 45 to perform quick and easy miter cuts without the aid of any additional tools.

Feature Adjustable Cutting HeightFeature Photo Available
Cutting depth can be easily adjusted to accommodate 8" to 10" blades and to provide limited plunge cutting functionality.

Feature Adjustable Water FeedFeature Photo Available
For more effective cooling during miter cuts, the blade guard is equipped with a special water feed that can be adjusted to direct water towards the cutting edge of the blade.

Feature Carriage Retention DeviceFeature Photo Available
To safely secure the saw for transportation, a knob located above the carriage can be used to fasten the carriage in place at any point along the rail.

Feature Side Extension TableFeature Photo Available
To provide additional lateral support for large tiles, a side extension table is included and can be attached on either side of the saw, depending on the needs of the operator.

Feature Rear & Side Splash GuardsFeature Photo Available
Splash guards reduce water spray to prevent the loss of water cooling during operation and to keep the work site clean.

Feature Removable Cutting Table PanelsFeature Photo Available
The rubber matted table consists of two independent panels, which can be removed to expose the underlying water tray for cleaning and maintenance.

Feature Slide-In-Legs with WheelsFeature Photo Available
The saw comes prebundled with four slide-in-legs, two of which possess integrated wheels to aid in transportation.

 
SawSDT-1037
Revision 1



Recommend Using...

BladeCR1095C1
10" Prolong Series Wet Porcelain Tile Blades

Owner's Manual

Manual for this model is not currently available online. Please contact customer service for a hard copy.



Go Back to the TopGo Back to the Top


1 The indicated blade is recommended by SawMaster for general use based on the saw's intended applications and its specified blade capacity. The blade may not be appropriate for all applications. As such, SawMaster recommends that you purchase blades that suit your particular needs. Feel free to contact customer service if you need any help with regards to selecting an appropriate blade.

2 Some saws are prepackaged with factory-default slide-in legs. In which case the saw stand shown here is not necessary, but is, nevertheless, recommended for added convenience.

3 Dimension measurements are made of the physical unit and not the package in which the unit is contained within. Measurements will be taken from one extreme to the opposing extreme, not including detachable appendages (e.g. stands, legs, splash guards, and cable retainers). Measurements are approximations that are rounded up to the closest 0.5" for convenience. For saws that feature miter cutting capability, measurements will be taken while the cutting head is set to an upright position.

E-Mail

For customers in North America only.
Copyright ©2009 SawMaster Diamond Tools, Inc. All rights reserved.

All saw information, including prices, contained above are accurate as of this date. For additional information, call our customer service department at 1-888-688-6899. Our representatives will be happy to answer any questions that you may have.