SawMaster Diamond Tools, Inc. - Diamond Tools for the Industry Professional
Search Go
  Home     Catalog     Support  
Home >  Product Catalog >  Saws >  Masonry Saws > 

Masonry Saw

SDT-1410 The SDT-1410 is a dry-cutting masonry chop saw designed for brick & block jobs. Due to the large 14" blade and potent 3 HP carbon-brush motor, the unit can effectively cut blocks up to 5" thick in a single pass. Despite the saw's overwhelming power and cutting capacity, it is nevertheless one of the lightest in its class—weighing only 75 lbs. For added versatility, the saw can be outfitted with an optional wet or dry kit to adapt the saw for use in a variety of situations.

Product Views
Side View
Enlarged Angle View

Product Specifications
Saw Type     Masonry
Motor     115 V/60 Hz
Horsepower     3 HP
Blade Capacity     14"
Blade Arbor     1"
RPM     3600
Weight     75 lbs
Cutting Depth     5"
Rip Cutting     16"
Thermal Protection     Equipped
Features Click on Feature Photo Available to see a close-up of the Feature

Feature Large Cutting Capacity
The wide, open back design easily accomodates materials up to 8" X 8" X 16".

Feature Clear View Cutting Head
The cutting head is ergonomically designed to provide an unobstructed view of the work area to increase operator efficiency and reduce fatigue.

Feature Steel Construction
The saw's solid steel construction provides the strength required to minimize vibrations to ensure precision cuts and to maximize the durability of the saw for years of continual use.

Feature Dry Cut Dust DeflectorFeature Photo Available
An aluminum plate located beneath the cutting head ensures that the dust generated from the cutting action is directed to the rear of the saw and away from the operator.

Feature Table Retention DeviceFeature Photo Available
The cutting table is equipped with a spring lock to secure the cutting table in one of two positions. When locked forward, the saw is ready to be transported in between job sites. When locked midway, the table is appropriately positioned for plunge cuts.

Feature Preset Height Position LockFeature Photo Available
The cutting head incorporates a dual spring system to assist in cutting height adjustments and a locking mechanism to secure the cutting head at two predetermined positions. When locked at either 5" or 8" above the table, the saw is configured for ripping through brick & block. When disengaged, the saw can be used for plunge cuts.

Feature Reusable Air FilterFeature Photo Available
The motor utilizes a special fire-resistant filter to remove debris from the air intake. The filter is designed for easy cleaning and can be reused indefinitely.

Feature Arbor CoverFeature Photo Available
The arbor cover permits easy blade installation and removal, and ensures that dust flows down and away from the operator.

Feature Cast Aluminum Cutting TableFeature Photo Available
A heavy-duty cast aluminum cutting table is equipped with steel ball bearing wheels to ensure smooth movement and to provide outstanding durability for the handling of large, heavy materials.

Feature Powerful MotorFeature Photo Available
The 3 HP carbon brush motor provides unrelenting torque at low amperages.

Revision 1

Recommend Using...

14" Wide U-Shaped Brick & Block Segmented Blades


Owner's Manual

Manual for this model is not currently available online. Please contact customer service for a hard copy.

Go Back to the TopGo Back to the Top

1 The indicated blade is recommended by SawMaster for general use based on the saw's intended applications and its specified blade capacity. The blade may not be appropriate for all applications. As such, SawMaster recommends that you purchase blades that suit your particular needs. Feel free to contact customer service if you need any help with regards to selecting an appropriate blade.

2 Some saws are prepackaged with factory-default slide-in legs. In which case the saw stand shown here is not necessary, but is, nevertheless, recommended for added convenience.

3 Dimension measurements are made of the physical unit and not the package in which the unit is contained within. Measurements will be taken from one extreme to the opposing extreme, not including detachable appendages (e.g. stands, legs, splash guards, and cable retainers). Measurements are approximations that are rounded up to the closest 0.5" for convenience. For saws that feature miter cutting capability, measurements will be taken while the cutting head is set to an upright position.


For customers in North America only.
Copyright ©2009 SawMaster Diamond Tools, Inc. All rights reserved.

All saw information, including prices, contained above are accurate as of this date. For additional information, call our customer service department at 1-888-688-6899. Our representatives will be happy to answer any questions that you may have.