SawMaster Diamond Tools, Inc. - Diamond Tools for the Industry Professional
Search Go
  Home     Catalog     Support  
 
Saw
Home >  Product Catalog >  Saws >  Stone Saws > 

SDT-25EX
Stone Saw
 

SDT-25EX The SDT-25EX stone saw features a 10" blade capacity and a 1-1/2 HP motor to facilitate the cutting of large, hard materials like stone, brick and porcelain tile. Spanning 55" in length, the saw is small enough to fit in conventional pickup trucks, while still being able to cut tiles up to 36" straight and 25" diagonally. This model provides built-in support for miter cuts and excellent vertical clearance for deep plunge cuts.


Product Views
Enlarged Angle View






Product Specifications
Saw Type     Stone
Motor     115 V/60 Hz
Horsepower     1-1/2 HP
Blade Capacity     10"
Blade Arbor     5/8"
RPM     3450
Weight     112 lbs
Cutting Depth     2-5/8"
Rip Cutting     36"
Diagonal Cutting     25" x 25"
Thermal Protection     Equipped
Features Click on Feature Photo Available to see a close-up of the Feature

Feature Blade Guard With BrushesFeature Photo Available
Brushes mounted inside the blade guard ensure that the water is properly distributed over the entire blade surface for better cooling and a longer diamond blade service life.

Feature Rubber Matted Cutting TableFeature Photo Available
The easily removable cutting table is covered with an anti-skid rubber coating, which allows the material being cut to sit still on the table while the cutting head is pulled through it.

Feature Compact Design
The SDT-25EX makes the perfect compromise between portability and the ability to handle large materials. Unlike larger bridge saws that may be difficult to transport, the SDT-25EX is compact enough to fit into a conventional pickup truck.

Feature Steel Water TrayFeature Photo Available
The water tray is part of the powder coated steel frame so that it is more durable, easier to clean, and rust-proof.

Feature Slide-In-Legs
The saw includes a set of sturdy slide-in-legs that allow the saw to be easily set up at the job site.

Feature Miter Cutting CapabilityFeature Photo Available
The saw can perform miter cuts easily by pivoting the rail 45°, which negates the need for additional tools.

Feature Plunge Cutting CapabilityFeature Photo Available
The cutting head offers a large vertical clearance that not only makes it capable of cutting at various depths, but it also allows the operator to perform deep plunge cuts with ease.

Feature Rear & Side Splash GuardsFeature Photo Available
Splash guards reduce water spray to prevent the loss of water cooling during operation and to keep the work site clean.

 
SawSDT-25EX
Revision 1



Recommend Using...

BladeCR1080C1
10" Cheetah Series Specialty Wet Tile Blades

Owner's Manual

Manual for this model is not currently available online. Please contact customer service for a hard copy.



Go Back to the TopGo Back to the Top


1 The indicated blade is recommended by SawMaster for general use based on the saw's intended applications and its specified blade capacity. The blade may not be appropriate for all applications. As such, SawMaster recommends that you purchase blades that suit your particular needs. Feel free to contact customer service if you need any help with regards to selecting an appropriate blade.

2 Some saws are prepackaged with factory-default slide-in legs. In which case the saw stand shown here is not necessary, but is, nevertheless, recommended for added convenience.

3 Dimension measurements are made of the physical unit and not the package in which the unit is contained within. Measurements will be taken from one extreme to the opposing extreme, not including detachable appendages (e.g. stands, legs, splash guards, and cable retainers). Measurements are approximations that are rounded up to the closest 0.5" for convenience. For saws that feature miter cutting capability, measurements will be taken while the cutting head is set to an upright position.

E-Mail

For customers in North America only.
Copyright ©2009 SawMaster Diamond Tools, Inc. All rights reserved.

All saw information, including prices, contained above are accurate as of this date. For additional information, call our customer service department at 1-888-688-6899. Our representatives will be happy to answer any questions that you may have.