SawMaster Diamond Tools, Inc. - Diamond Tools for the Industry Professional
Search Go
  Home     Catalog     Support  
 
Saw
Home >  Product Catalog >  Saws >  Stone Saws > 

SDT-35
Stone Saw
 

SDT-35 For more demanding applications involving thicker materials with harder aggregates, SawMaster presents the industrial strength SDT-35 stone saw, which features a potent 2-1/2 HP direct-drive motor and a sizable 14" blade capacity. Combined with its lengthy 34" straight and 24" diagonal cutting distances, the saw can handle large stone jobs with relative ease.


Product Views
Enlarged Angle View






Product Specifications
Saw Type     Stone
Motor     115 V/60 Hz
Horsepower     2-1/2 HP
Blade Capacity     12"~14"
Blade Arbor     1"
RPM     3450
Weight     185 lbs
Cutting Depth     4-1/4"
Rip Cutting     34"
Diagonal Cutting     24" x 24"
Thermal Protection     Equipped
Features Click on Feature Photo Available to see a close-up of the Feature

Feature Powerful 2-1/2 HP MotorFeature Photo Available
The equipped powerful 2-1/2 HP direct-drive, water sealed motor provides maximum performance and a long service life.

Feature Water PumpFeature Photo Available
The water pump conveys water from a hanging 20-liter bucket directly to the diamond blade. The bucket collects filtered water, which prevents damages to the pump from cutting debris. It also doubles as a convenient means for replenishing the water supply.

Feature Precision AlignmentFeature Photo Available
When adjusting the cutting head to an upright position, a limiter ensures that the cutting head is perpendicular to the cutting table.

Feature Rear & Side Splash GuardsFeature Photo Available
Splash guards reduce water spray to prevent the loss of water cooling during operation and to keep the work site clean.

Feature Thermal Overload Protection
Automatic thermal overload protection prevents the motor from overheating and protects the saw from power surges.

Feature Slide-In-Legs
The saw includes a set of sturdy slide-in-legs that allow the saw to be easily set up at the job site.

Feature Easy-To-Carry
Carrying handles mounted on the corners make it easy to quickly transport the saw to other job sites.

Feature Carriage-Rail System
The cutting head sits on a carriage that travels along a steel rail for the entire length of the saw. This arrangement maximizes its cutting capacity while providing a large cutting surface. When desired, the rail can be tilted 45° for miter cutting.

Feature Reinforced Miter Cutting CapabilityFeature Photo Available
The saw can perform miter cuts easily by pivoting the rail 45, which negates the need for additional tools. Due to the saw's weight and large dimensions, additional reinforcing posts are used to provide added stability during cutting operations.

Feature Plunge Cutting CapabilityFeature Photo Available
The cutting head offers a large vertical clearance that not only makes it capable of cutting at various depths, but it also allows the operator to perform deep plunge cuts with ease.

Feature Rubber Matted Cutting TableFeature Photo Available
The easily removable cutting table is covered with an anti-skid rubber coating, which allows the material being cut to sit still on the table while the cutting head is pulled through it.

 
SawSDT-35
Revision 1



Recommend Using...

BladeSN1412RS1
14" Stone Segmented Blades

Owner's Manual

Manual for this model is not currently available online. Please contact customer service for a hard copy.



Go Back to the TopGo Back to the Top


1 The indicated blade is recommended by SawMaster for general use based on the saw's intended applications and its specified blade capacity. The blade may not be appropriate for all applications. As such, SawMaster recommends that you purchase blades that suit your particular needs. Feel free to contact customer service if you need any help with regards to selecting an appropriate blade.

2 Some saws are prepackaged with factory-default slide-in legs. In which case the saw stand shown here is not necessary, but is, nevertheless, recommended for added convenience.

3 Dimension measurements are made of the physical unit and not the package in which the unit is contained within. Measurements will be taken from one extreme to the opposing extreme, not including detachable appendages (e.g. stands, legs, splash guards, and cable retainers). Measurements are approximations that are rounded up to the closest 0.5" for convenience. For saws that feature miter cutting capability, measurements will be taken while the cutting head is set to an upright position.

E-Mail

For customers in North America only.
Copyright ©2009 SawMaster Diamond Tools, Inc. All rights reserved.

All saw information, including prices, contained above are accurate as of this date. For additional information, call our customer service department at 1-888-688-6899. Our representatives will be happy to answer any questions that you may have.